Oracle X7-8, Руководство по обслуживанию

Страница: 106 / 308

Prepare the Server for Warm Service (Oracle ILOM CLI)
Note -
This procedure is performed locally and requires physical access to the server front
panel.
1.
Open an SSH session and at the command line log in to the SP Oracle ILOM CLI.
Log in as a user with root or administrator privileges. For example:
ssh root@
ipaddress
where ipaddress is the IP address of the server module SP. Type a password when prompted.
For more information, see “Using Oracle ILOM” in Oracle Server X7-8 Installation Guide .
The Oracle ILOM CLI prompt appears:
->
2. Verify that the Power State is OFF:
At the prompt, type the following command:
stop /System
3. To turn on the Locate Button/LED indicator, see “Turn On the Locate Button/LED
Remotely (Oracle ILOM CLI)” on page 120 .
The
set /System/ locator_indicator=on
command activates the Locate Button/LED indicator
LED on the server front panel.
For other options, see
“Managing the Locate Button/LED” on page 120 . To turn off the
Locate Button/LED indicator, type:
set /System/ locator_indicator=off
.
4. Power down the server gracefully.
For graceful power off, see “Power Down the Server Gracefully (Oracle ILOM
CLI)” on page 112 . The
stop /System
command powers off the server to Standby power
mode.
For more power off options, see
“Powering Down the Server” on page 111 .
5. Once at the service location, press the Locate Button/LED button to deactivate
the indicator.
For more information, see “Control the Locate Button/LED Locally” on page 121 .
6.
Set up an ESD-safe space at the service location.
Set up a space where you can set components. See “Performing Electrostatic Discharge and
Static Prevention Measures” on page 98 .
7. Perform warm service removal and installation procedures on components.
106 Oracle Server X7-8 Service Manual • October 2017