Oracle X7-8, Руководство по обслуживанию

Страница: 87 / 308

Troubleshooting Server Subsystems
When a fault occurs on a drive in a server, the amber Fault Service Required LED lights on
the front of the drive. This amber LED enables you to locate the faulted drive in the system.
Additionally, the front and rear panel Service Action Required LEDs also light when the server
detects a hard drive fault.
The server storage subsystem consists of the following:
■
Storage drives: 8 SAS3 HDD or SSD SFF drives
Four hot-swappable SAS3 storage drives per SMOD: SMOD0: bays 0-3; SMOD1: bays 4-7.
■
Controllers
■
Volumes
■
Expanders
Networking Subsystem
Use the Oracle Integrated Lights Out Manager (ILOM) Networking page to view networking
information, including Ethernet Controllers and Infiniband Controllers.
The server networking subsystem consists of the following:
■
Ethernet Controllers
SMOD0 System A NET 0-3 1/10 GbE Network ports labeled NET0, NET1, NET2, and
NET3
SMOD1 System B NET 0-3 1/10 GbE Network ports are labeled NET0, NET1, NET2, and
NET3
■
Infiniband Controllers
Installation Rules:
Oracle Dual Port QDR InfiniBand Host Channel Adapter M3 Infiniband card PCIe slot
number order: A: 8, 6, 4, 2, 7, 5, 3, 1 B: 16, 14, 12,10, 15, 13, 11
Oracle Dual Port QDR InfiniBand Host Channel Adapter M9 Infiniband card PCIe slot
number order: 16, 8, 14, 6, 12, 4, 10, 2, 15, 7, 13, 5, 11,3, 9, 1
■
Two 10/100/1000 GbE Network Ethernet ports, one NET MGT port each in SMOD0 and
SMOD1
Ethernet ports enable you to connect the system to the network. The Ethernet ports use RJ-
45 cables for 10/100/1000BASE-T connections.
Ethernet Port Status Indicators are two status indicators (LEDs) that are visible from the back of
the server.
Troubleshooting and Diagnostics 87