Oracle X7-8, Руководство по обслуживанию

Страница: 88 / 308

Troubleshooting Server Subsystems
Status Indicator
Name
Location and
Color
State and Meaning
Activity Top left Green ■ ON – Link up. Lights when the Network (NET) 10/100/1000BASE-T RJ-
45 Gigabit Ethernet (GbE) NET 0 port is active. Indicates a live network.
■ Off– No activity. No link. Not operational.
■ FLASHING – Packet activity. Blinks with network traffic.
Link speed Top right Bi-
colored: Amber/
Green
■ Off – 10BASE-T link (if link up). (10 GigabitEthernet 10GBASE-T)
■ Amber ON – 100BBASE-T link. (Fast Ethernet 100 BASE-TX)
■ Green ON – 1000BBASE-T link. (GigabitEthernet 1000BASE-T)
The server input/ouput subsystem consists of the following:
■
8 or 16 PCIe Gen3 IO slots (up to eight 16-lane + eight 8-lane)
■
Two 10/100/1000 GbE Network Ethernet ports, one SER MGT port each in SMOD0 and
SMOD1
■
4 USB 3.0 ports (2 external, one each in SMOD0 and SMOD1, 2 internal, one each in
SMOD0 and SMOD1)
Note -
Internal USB ports are not used.
See “Back Panel Connector Locations” on page 90 .
PCI Devices Subsystem
Use the Oracle Integrated Lights Out Manager (ILOM) PCI Devices page to view inventory
properties for the PCIe add-in cards and the built-in devices that are detected on your server.
To view the inventory properties for the devices shown on the PCI Devices page, follow these
steps:
Click the link at the top of the page for the appropriate PCI device.
View the inventory properties appearing in the table. If applicable, mouse-over the Details
column to view additional device properties.
The server PCI devices subsystem consists of the following components:
■
Installed add-in cards and devices: PCI Card optional component
■
On-board devices: Ethernet Controller NET0-3 (Ethernet NIC 1-4)
88 Oracle Server X7-8 Service Manual • October 2017