manualshive.com logo in svg

Oracle X7-8, Руководство по обслуживанию

Поделиться
Скачать
Oracle X7-8 Скачать руководство пользователя страница 282

BIOS Advanced Menu Selections

Setup Options

Options

Defaults

Description

Security TPM Device Support

Disabled/Enabled

Disabled

Use this option to enable or

disable Trusted Platform Module

(TPM) support. If disabled, the

OS will not show TPM. Reset of

the platform is required.

Active PCR banks (R/O)

N/A

N/A

Displays active Platform

Configuration Register (PCR)

banks.

Available PCR banks (R/O)

N/A

N/A

Displays available Platform PCR

banks.

SHA-1 PCR Bank (R/O)

N/A

N/A

Displays if the SHA-1 PCR bank

is enabled/disabled.

SHA256 Bank (R/O)

N/A

N/A

Displays if the SHA256 PCR

bank is enabled/disabled.

Pending Operation

None/TPM Clear

None

Use this option to schedule an

operation for the security device.

Note - 

Your computer will

reboot during restart in order to

change the state of a security

device.

Platform Hierarchy

Disabled/Enabled

 

Use this option to enable or

disable platform hierarchy.

Storage Hierarchy

Disabled/Enabled

 

Use this option to enable or

disable storage hierarchy.

Endorsement Hierarchy

Disabled/Enabled

 

Use this option to enable or

disable endorsement hierarchy.

TPM 2.0 UEFI Spec Version (R/

O)

N/A

N/A

Displays the TPM 2.0 UEFI

spec version.

Physical Presence Spec Version

1.2/1.3

1.3

Use this option to select the

physical presence spec version.

TPM 20 InterfaceType (R/O)

N/A

N/A

Displays the TPM 20 interface

type.

Device Select (R/O)

N/A

N/A

Displays the TPM device.

BIOS Advanced Menu Processor Configuration

Options

The following table describes the BIOS Advanced Menu processor configuration options.

282

Oracle Server X7-8 Service Manual • October 2017

Содержание X7-8





















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды