ONOSOKKI TS-3200A, Инструкция по эксплуатации

Страница: 31 / 171

3-3
3.1.1 Basic Key Operations
In the following explanation, direct switches on the front panel are enclosed in [ ] and soft menus of the
LCD display in ( ).
Moves the cursor to the left.
Moves the cursor upwards.
Moves the cursor downward.
Moves the cursor to the right.
ENTER Establishes the setting and then proceeds with the next item.
ESC Returns to one-step higher level. GP-IB remote mode: Local key
MENU DETECTOR setting. USER setting
LOCK TorqueZero, Locks the CW/CCW key.
CW/CCW Selects the torque zero CW/CCW. DETECTOR setting. (Effective at the time of
Rotation Int.) Press and hold this key to change the mode.
TRQ ZERO Sets the torque zero value.
TRIG Trigger key. Effective at the time of display Gate Ext, deviation, ripple factor,
peak hold.
LCD ON/OFF Turns the LCD and back light ON or OFF.
MEAS DISP Measurement screen
SET VIEW Displays a list of parameter settings.
OPTION Displays installed options only for check.
CAL Analog output zero and span setting/check functions.
(1) When you press the [MENU] key, the parameter setting menu appears.
(2) Press the , , , and keys to display the target item.
The items which can be selected are highlighted and blinking (referred to as cursor
hereafter).
The cursor can be moved to the target position using the and cursor control keys.
The selected item and numeric value can be switched between using the and cursor
control keys.
(3) Press the [ENTER] key to establish the setting.
(4) Repeat steps (2) and (3) depending on the item.
(5) Press the [ESC] key to return to the previous stage.
(6) When you have set all items, press the [MEASDISP] key to select the measurement mode.
3. Basic Operations