ONOSOKKI TS-3200A, Инструкция по эксплуатации

Страница: 37 / 171

3-9
■
Setting Torque Detector Type
(11) Select (TYPE) using the key and then press the [ENTER] key.
0: SS/DD/DSTP/MD .......... Torque measurement can be performed from the stationary condition (rpm 0).
1: DP .................................. Torque measurement cannot be performed in the stationary condition.
This parameter is reflected in the torque measurement ready state.
When 0:SS/DD/DSTP/MD is selected, measurement becomes ready when the motor of the torque
detector is rotating and detection pulse generated.
When 1:DP is selected, presence or absence of the detection pulse of the torque detector is not reflected in
the torque measurement ready state.
For N-0 CW/N-0CCW, refer to 3.5, "Setting Frequency Characteristic N-0 Compensation Values of
Detector."
(12) Select 0:SS/DD/DSTP/MD or 1:DP using the and keys and then press the [ENTER]
key.
This completes parameter setting for the torque detector.
3. Basic Operations