ONOSOKKI TS-3200A, Инструкция по эксплуатации

Страница: 33 / 171

3-5
• UNIT (unit)
The unit specified here becomes the unit for the measurement display. (For selection of the unit, refer to
4.12, "Torque Unit Conversion."
1: mNm
2: Nm
3: kNm
• DIGIT (the number of digits of the measurement display)
The number of display digits of the measurement display (including decimal places) is 4 or 5. When the
number of digit of item RANGE in the name plate of the torque detector is 1, select 4; when it is 2, select
5. However, the increase in the number of digits does not result in improved accuracy of torque
measurement.
• Item FACTOR
Input range 1 to 65535
• P/RR (the number of built-in gear teeth)
This indicates the number of teeth of the gear inside the torque detector. It is not the number of teeth of
the rotary encoder attached to the shaft of the torque detector. In this case, enter the numeric value
inscribed in the name plate of the torque detector. Depending on the model of torque detector, the rpm
can be detected from the the number of teeth of the built-in gear.
RANGE DIGIT
(Number of input digits)
Setting Measurement
Display
5
50
4
5
5.000
5.0000
When the CAPACITY setting is 5Nm
3. Basic Operations