ONOSOKKI TS-3200A, Инструкция по эксплуатации

Страница: 107 / 171

5-11
(5) Select (ITEM), (SET), (MODE), (AVE TIME), and (H/L) using the and keys and then
press the [ENTER] key.
1
Select (CH1 and CH2) or (CH3 and CH4) using the and keys and then press the
[ENTER] key.
2
Select a comparison item of (ITEM) using the and keys and then press the
[ENTER] key.
The cursor moves to (SET).
3
Enter the comparison setting of (SET) using the , , , and keys and then press
the [ENTER] key.
The cursor moves to (MODE).
4
Select the comparison mode of (MODE) using the and keys and then press the
[ENTER] key.
The cursor moves to (AVE TIME).
5
Select the travel time setting of (AVE TIME) using the , , , and keys and then
press the [ENTER] key.
The cursor moves to (H/L).
6
Select the output logic (H/L) using the and keys and then press the [ENTER] key.
The cursor returns to the channel (CH1, CH2), (CH3, CH4) selected by
1
.
If you do not press the [ENTER] key in step
6
, the settings in steps
2
to
6
are not
u p d a t e d .
Be sure make setting in steps
2
to
6
continuously and then press the [ENTER] key to
return the cursor to CH1/CH2/CH3/CH4.
Since the comparison operation timing depends on MODE, refer to 5.2.2, "Description of
MODE."
5. Options