ONOSOKKI TS-3200A, Инструкция по эксплуатации

Страница: 36 / 171

3-8
■
Setting Factor
(6) Select (FACTOR) using the , , , and keys and then press the [ENTER] key.
Press the [ENTER] key to move the cursor to a numeric unit.
(7) Enter 8086 as FACTOR using the , , , and keys and then press the [ENTER] key.
When you press the [ENTER] key, the setting is established and then the cursor moves to (FACTOR).
After setting a numeric value of FACTOR, the FACTOR temperature compensation value can be set.
For the setting procedure, refer to 4.13, "Temperature Compensation for FACTOR of Torque Detector."
■
Zero Adjustment
Cannot be specified in this screen.
Refer to 3.4, "Zero Adjustment."
■
Setting the Number of Pulses
This pulse setting is reflected when 0:IntRevo is selected for
3.6, "Setting Parameters of Rotary Encoder" regardless of torque measurement.
When using the rotary encoder of the MP-910, MP-981, etc., you do not need to change this setting.
Leave the default value unchanged.
(8) Select (P/R) using the key and then press the [ENTER] key.
Press the [ENTER] key to move the cursor to the numeric value.
(9) Enter 0120 as the number of pulses using the , , , and keys and then press the
[ENTER] key.
When you press the [ENTER] key, the numeric value is established and then the cursor moves to (P/R).
■
Selecting Rotational Direction Selection Mode
(10) Select (ROTATION) using the key and then press the [ENTER] key.
0: EXT Select the rotational direction using the EXT REMOTE function.
1: INT Select the rotational direction using the INT [CW/CCW] key.
For details, refer to 3.3, "Selecting Rotational Direction (CW/CCW)."