ONOSOKKI TS-3200A, Инструкция по эксплуатации

Страница: 133 / 171

5-37
DTD(d) Number of digits of torque detector (DIGIT)
d = 4:4 digits
5:5 digits Increase in the number of digits does not result in improved torque
measurement accuracy.
DTP(d) Number of teeth of torque detector
d = 1 to 9999
DTNn (,r,t) Torque detector N-0
n = 0:CW
1:CCW
r = 0 to 99999 Rotation data
t = 0 to
±
99999 Torque data
The number of points for the N-0 setting is 10 per each rotational direction (CW/
CCW). With GP-IB, to read setup data using this command, send DTN0 or DTN1
and then read data continuously 10 times. In other cases, GP-IB is locked.
DNSn(,f) Torque detector N-0 switch
n= 0:CW
1:CCW
f= 0:OFF
1:ON
2:CLR
DNAd N-0 auto
d = 0:stop (calculate)
1:start (sampling)
DTT(d) Torque detector type
d = 0:SS/DD/DSTP/MDTYPE(DYNAMIC STATIC DETECTOR)
1:DP TYPE(DYNAMIC DETECTOR)
If the torque detector is the hollow body rotation type (a motor is installed at the top,
such as MD, SS, DSTP, MD), select 0:DYNAMIC STATIC DETECTOR;
otherwise, select 1:DYNAMIC DETECTOR.
5. Options