ONOSOKKI TS-3200A Скачать руководство пользователя страница 6

Страница: 6 / 171

• Never cut the internal or external ground wire of a product or disconnect the wire connected

to the protective ground terminal of the instrument because doing so may cause electric

shock or damage to the instrument.

• Before connecting the instrument to the device under measurement or external control

circuit, make sure that protective earth is securely made and that the the power is OFF.

Connecting to external equipment without protective earth or while the power is still ON

may cause electric shock.

• Before touching parts of the instrument where voltage/current is output or circuits connected

to parts where voltage/current is output, make sure that the power is OFF. Touching such

parts without turning the power OFF may cause electric shock. Be sure to sufficiently

insulate circuits from output voltage/current.

• Be sure that the power always meets specified voltage, current, and frequency requirements.

Use of power other than that specified may cause electric shock, fire, or damage to the

instrument.

• If you hear thunder, do not touch any metal parts of the instrument or the plug because there

is a risk of electric shock from conducted lighting. Do not use this instrument outdoors if

you hear thunder.

• Be sure to use the power cable and power plug supplied with the instrument or the ones

specified by ONO SOKKI. Use the standard AC power cable supplied with the instrument

with 125VAC or less. When operating the instrument with voltage exceeding 125VAC, be

sure to use the specified power cable (with a withstand voltage of 250VAC or higher) which

is prepared as an option.

• Turn the power OFF before plugging or unplugging the power cable failure to do so may

cause surge voltage, etc., resulting in failure.

• If the instrument will not be in use for a prolonged period of time, unplug the power cord

from the outlet. There is a risk of deteriorated insulation which may cause electric shock,

short circuit, or fire.

• Do not use three-pronged power cords with extension cords which do not have a ground

wire because doing so defeats protective grounding.

WARNING

PRECAUTIONS ON ELECTRIC SHOCK

ABOUT THE POWER CORD

Содержание TS-3200A












































































































































































Результаты поиска

Содержание TS-3200A

Отзывы:

Похожие инструкции для TS-3200A

Бренды по названию

Популярные бренды

ONOSOKKI TS-3200A, Инструкция по эксплуатации

Результаты поиска

Содержание TS-3200A

Отзывы:

Похожие инструкции для TS-3200A

Бренды по названию

Популярные бренды