ONOSOKKI TS-3200A, Инструкция по эксплуатации

Страница: 138 / 171

5-42
5.6.10 Measurement Commands
MES Measurement mode
Ends clear, ends CAL, ends TEST, and forcibly ends N-0 AUTO.
Equivalent to the "MEASDISP" panel key.
CLCn Clear control
n = 0 CLROFF
n = 1 CLRON Forcibly zeros the display, analog output, BCD output, etc.
RDD Display data read (ASCII) Read display data
Successive commands for the TS-3600B/TS-3100B
Since the TS-3200A allows 7-row display, when this command is received, data for the
items set in main display 1 to 2 are returned.
With this command, data is output in the following format:
1
Upper row display data: Right-justified, signed 7 characters
2
Unit data: 4 characters at the time of GPIB (/min for r/min), 5
characters at the time of RS
3
Space: 2 characters
4
Lower row display data: Right-justified, signed 7 chaacters
5
Unit data: 4 characters at the time of GPIB (/min for r/min), 5
characters at the time of RS
6
Delimiter: Carriage return (0DH) + Line feed (0AH)
RGD Gate data read (ASCII) Read average value for each gate setting
Successive commands for the TS-3600B/TS-3100B
With this command, data is output in the following format. Only GPIB is possible.
However, if the gate time setting is 0.3s or less, normal communication may be disturbed.
1
Torque average value data: 7 characters (including signs and decimal point)
2
Torque unit data: 4 characters
3
Space: 2 characters
4
Rotational average data: 7 characters (including signs and decimal point)
5
Rotation unit data: 4 characters (/min for r/min)
6
Space: 2 characters
7
Output average data: 7 characters (including signs and decimal point)
8
Output unit data: 4 characters
9
Delimiter: Carriage return (0DH) + Line feed (0AH)
+XX.XXX
1
UUUU
2
(Space)
3
+XXX.XX
4
UUUU
5
(Space)
6
+XXX.XX
7
UUUU
8
CR+LF
9
+XX.XXX
1
UUUU
2
(Space)
3
+XXX.XX
4
UUUU
5
CR+LF
6