ONOSOKKI TS-3200A, Инструкция по эксплуатации

Страница: 49 / 171

3-21
(4) Select (N-0 CW) or (N-0 CCW) using the and keys and then press the [ENTER] key.
The following screen appears.
(5)
1
Select (ON/OFF). (N-0 compensation)
Select 1:ON or 2:OFF using the and keys and then press the [ENTER] key.
Press the [ENTER] key to move the cursor to
2
.
1:ON Use N-0 compensation.
0:OFF Does not use N-0 compensation.
To acquire N-0 compensation values manually, select 2:OFF, enter a compensation value, then select
1:ON.
2
Enter MODE.
Select 0:AUTO or 1:MANU using the and keys and then press the [ENTER] key.
0:AUTO Sets N-0 compensation values automatically.
1:MANU Sets N-0 compensation values manually.
(6) Enter the REVO (rpm) and TORQUE (torque) values for P1 to P10 using the and keys
and then press the [ENTER] key.
Enter REVO and TORQUE display values with the decimal point removed.
It is not necessary to enter values for all of P1 to 10. To omit entry, set REVO and TORQUE to 0.
Example:
REVO 1000.0 r/min
➞
10000
100.0r/min
➞
01000
TORQUE 0.010Nm
➞
0010 (in case of DIGIT4)
0.0011Nm
➞
00011 (in case of DIGIT5)
Note: ・ Be careful not to set the same rotational speed to compensation points.
・
When N-0 compensation values are manually obtained and set, set POINT to 0:0 with
reference to 3.6, "Setting Parameters of Rotary Encoder" to set the decimal point posi-
tion of the rotational speed to the initial value. After setting N-0 compensation values,
use an arbitrary POINT setting.
3. Basic Operations
1
2