ONOSOKKI TS-3200A, Инструкция по эксплуатации

Страница: 162 / 171

8-8
8.5 Interface Unit
REMOTE
■
Items
Clear input Contact input Sets the measurement value forcibly to 0 when the
contact is closed.
Rotational direction selection input Contact input Selects the CW/CCW torque zero point.
Closes the contact when CCW is selected.
Trigger input Contact input Updates display and BCD at contact close when the
external gate is selected.
ORed with the front panel switch when the trigger
function is used.
Trigger output Contact output Turns ON/OFF in synchronization with the display
gate time.
Example: In case of 1s gate, turns ON for 0.5s and
OFF for 0.5s.
Synchronous operation of multiple TS-3200A is
possible using the trigger input and trigger output.
Ready output Contact output When the TS-3200A is in the torque measurement
mode, the contact closes.
■
Signal Formats
Input section In case of non-voltage contact input
Open voltage: 5.25V or less
Short-circuit current: 1mA or less
In case of voltage input
H level: +4 to +5.25V or less
L level: 0 to +1V
Output section Photo-MOS relay
Load voltage: 30VDC or less
Load current: 100mA or less
ON resistance: 10ohms or less
OFF resistance: 500kohms or higher
Connector R03-R8M