Mitsubishi Electric MR-J4, Инструкция по эксплуатации

Страница: 41 / 794

1. FUNCTIONS AND CONFIGURATION
1 - 22
1.6 Model designation
(1) Rating plate
The following shows an example of rating plate for explanation of each item.
TOKYO 100-8310, JAPAN MADE IN JAPAN
MODEL Model
Capacity
Applicable power supply
Rated output current
Standard, Manual number
Ambient temperature
IP rating
KC certification number, the year
and month of manufacture
Serial number
Country of origin
KCC-REI-MEK-TC300A621G51 DATE: 2014-05
POWER
INPUT
OUTPUT
STD.: IEC/EN61800-5-1 MAN.: IB(NA)0300175
Max. Surrounding Air Temp.: 55°C
IP20 : 100W
: 3AC/AC200-240V 0.9A/1.5A 50/60Hz
: 3PH170V 0-360Hz 1.1A
AC SERVO
MR-J4-10A
SER.A45001001
(2) Model
The following describes what each block of a model name indicates. Not all combinations of the symbols
are available.
Series
Rated output
General-purpose interface
Special specification
Symbol Rated output [kW]
10 0.1
20 0.2
40 0.4
60 0.6
70 0.75
100 1
200 2
350 3.5
500 5
700 7
11K 11
15K 15
22K 22
Symbol Special specification
None Standard
-RJ
Fully closed loop control four-wire type/
load-side encoder A/B/Z-phase input compatible
Positioning mode compatible
MR-J4-_A_ without regenerative resistor (Note 1)
MR-J4-_A_-RJ without regenerative resistor (Note 1) -PX
-RZ
Note 1. Indicates a servo amplifier of 11 kW to 22 kW that
does not use a regenerative resistor as standard
accessory. Refer to Appendix 10.2 for details.
Power supply
Symbol Power supply
None 3-phase or 1-phase
200 V AC to 240 V AC
4 3-phase 380 V AC to 480 V AC
MR-J4-_A_-RJ without a dynamic brake (Note 2) -RU
MR-J4-_A_ without a dynamic brake (Note 2) -ED
2. Dynamic brake which is built in 7 kw or smaller servo
amplifiers is removed. Refer to Appendix 10.1 for details.
1
1-phase 100 V AC to 120 V AC