Mitsubishi Electric MR-J4, Инструкция по эксплуатации

Страница: 216 / 794

5. PARAMETERS
5 - 17
No./symbol/
name
Setting
digit
Function
Initial
value
[unit]
Control
mode
P S T
PA09
RSP
Auto tuning
response Set a response of the auto tuning. 16
Setting
value
Machine characteristic
Setting
value
Machine characteristic
Response
Guideline for
machine
resonance
frequency [Hz]
Response
Guideline for
machine
resonance
frequency [Hz]
1
Low
response
Middle
response
2.7 21
Middle
response
High
response
67.1
2 3.6 22 75.6
3 4.9 23 85.2
4 6.6 24 95.9
5 10.0 25 108.0
6 11.3 26 121.7
7 12.7 27 137.1
8 14.3 28 154.4
9 16.1 29 173.9
10 18.1 30 195.9
11 20.4 31 220.6
12 23.0 32 248.5
13 25.9 33 279.9
14 29.2 34 315.3
15 32.9 35 355.1
16 37.0 36 400.0
17 41.7 37 446.6
18 47.0 38 501.2
19 52.9 39 571.5
20 59.6 40 642.7
Setting range: 1 to 40
PA10
INP
In-position
range Set an in-position range per command pulse.
To change it to the servo motor encoder pulse unit, set [Pr. PC24].
Setting range: 0 to 65535 100
[pulse]
PA11
TLP
Forward
rotation
torque
limit/positive
direction
thrust limit You can limit the torque or thrust generated by the servo motor. Set the parameter
referring section 3.6.1 (5).
When you output torque or thrust as analog monitor output, the larger value of [Pr.
PA11 Forward rotation torque limit/positive direction thrust limit value] or [Pr. PA12
Reverse rotation torque limit/negative direction thrust limit value] will be the
maximum output voltage (8 V).
Set the parameter on the assumption that the maximum torque or thrust is 100.0 [%].
The parameter is for limiting the torque of the servo motor in the CCW power running
or CW regeneration, or limiting the thrust of the linear servo motor in the positive
direction power running or negative direction regeneration. Set this parameter to
"0.0" to generate no torque or thrust.
Setting range: 0.0 to 100.0 100.0
[%]
PA12
TLN
Reverse
rotation
torque
limit/negative
direction
thrust limit You can limit the torque or thrust generated by the servo motor. Set the parameter
referring section 3.6.1 (5).
When you output torque or thrust with analog monitor output, the larger value of [Pr.
PA11 Forward rotation torque limit/positive direction thrust limit value] or [Pr. PA12
Reverse rotation torque limit/negative direction thrust limit value] will be the
maximum output voltage (8 V).
Set the parameter on the assumption that the maximum torque or thrust is 100.0 [%].
The parameter is for limiting the torque of the servo motor in the CW power running
or CCW regeneration, or limiting the thrust of the linear servo motor in the positive
direction power running or negative direction regeneration. Set this parameter to
"0.0" to generate no torque or thrust.
Setting range: 0.0 to 100.0 100.0
[%]