Mitsubishi Electric MR-J4, Инструкция по эксплуатации

Страница: 262 / 794

5. PARAMETERS
5 - 63
No./symbol/
name
Setting
digit
Function
Initial
value
[unit]
Control
mode
P S T
PF24
*OSCL2
Vibration
tough drive
function
selection _ _ _ x Oscillation detection alarm selection
Select alarm or warning when an oscillation continues at a filter readjustment
sensitivity level of [Pr. PF23].
The digit is continuously enabled regardless of the vibration tough drive in [Pr.
PA20].
0: [AL. 54 Oscillation detection] will occur at oscillation detection.
1: [AL. F3.1 Oscillation detection warning] will occur at oscillation detection.
2: Oscillation detection function disabled
0h
_ _ x _ For manufacturer setting 0h
_ x _ _ 0h
x _ _ _ 0h
PF25
CVAT
SEMI-F47
function -
Instantaneous
power failure
detection time Set the time of the [AL. 10.1 Voltage drop in the control circuit power] occurrence.
To disable the parameter, set "Disabled (_ 0 _ _)" of "SEMI-F47 function selection"
in [Pr. PA20].
This parameter is not available with MR-J4-03A6 servo amplifiers.
Setting range: 30 to 200 200
[ms]
PF31
FRIC
Machine
diagnosis
function -
Friction
judgement
speed Set a (linear) servo motor speed that divides a friction estimation area into high and
low during the friction estimation process of the machine diagnosis.
Setting "0" will set a value half of the rated speed.
When your operation pattern is under the rated speed, we recommend that you set a
half value of the maximum speed.
Forward rotation
direction
(Positive direction)
0 r/min
Operation pattern
[Pr. PF31] setting
Maximum speed in operation
Servo motor
speed
(Linear servo
motor speed)
Reverse rotation
direction
(Negative direction)
(0 mm/s)
Setting range: 0 to permissible speed
0
[r/min]/
[mm/s]
PF34
*SOP3
RS-422
communi-
cation
function
selection 3 _ _ _ x For manufacturer setting 0h
_ _ x _ 0h
_ x _ _ 0h
x _ _ _ MR-PRU03 selection
Select this if using an MR-PRU03.
0: Disabled
1: Enabled
This parameter setting is used with servo amplifier with software version B3 or later.
This digit is not available with MR-J4-03A6 servo amplifiers.
0h