Miranda Kaleido-X, Руководство пользователя, Страница: 60 / 407

52
Operation of the Monitor Wall
3
The source signal displayed on the monitor is routed to the selected destination.
Changing Logical Sources Assignments on a Kaleido-X Configured as a Router
To change a monitor’s source assignment by using a router control device or application:
• Apply a crosspoint change to route the desired Kaleido-X logical source to the video monitor whose
source assignment you wish to change on the monitor wall, in the same way you would do for any
router controlled by the device or application you have.
The video from the first video level assignment within the selected logical source appears in the video
window.
When the current layout is reloaded, either of the following two situations may apply:
— No logical source: If there was no logical source associated with the monitor, then the Kaleido-X
will remember the new source assignment.
— Not a monitor wall destination: If the monitor was not already configured as a monitor wall
destination, then the layout will be reloaded in its initial state, as it was configured in XEdit.