Miranda Kaleido-X, Руководство пользователя, Страница: 291 / 407

Configuring an External Router
283
– If the connection type is TCP/IP or UDP/IP , you must specify the router’s IP address and port
number:
8. Click Use protocol defaults to specify the default parameters for the selected protocol (this can be
useful to begin if you do not have access to your specific router’s documentation).
At this point, you have created a new physical router.
Step 2 – Adding Physical Levels
There is not always just one connection per router. Sometimes, the connection is to one of several routers
in a cascade configuration. For example, in the case of Nevion (Network Electronics) VikinX routers, the
multi-viewer sends commands to one router in the cascade, which passes it on to the other routers via an
internal communications mechanism (MIDI in this case). Each router in the cascade has an ID. To represent
this arrangement in XEdit, the router connected to the multi-viewer is considered the
physical router , with
all of the routers in the cascade represented by a physical level .
Even if the multi-viewer is connected directly to a router (i.e. no intermediary device), you still use the
mechanism of defining a physical level. The distinction here is that there would only be one physical level.
To add one or more physical levels:
1. In the Router Configurations tab, click Add level :