manualshive.com logo in svg

Miranda Kaleido-X, Руководство пользователя, Страница: 195 / 407

Поделиться
Скачать
Miranda Kaleido-X Скачать руководство пользователя страница 195

Configuring Video Monitors

187

Configuring Video Monitors

Resizing a Video Monitor

To resize a video monitor:

•

Drag any of the corner handles, inwards or outwards.

The video monitor, and the associated video window, will become smaller or larger, and they will both 
keep their aspect ratio.

•

Drag any of the side handles, inwards or outwards.

The bounds of the video monitor will change, while the video window will still keep its aspect ratio.

•

Change the aspect ratio property of the video monitor. See “Setting a Video Monitor’s Aspect Ratio” 
below.

The video monitor will keep its bounds, and the video window will be resized to fill as much of the 
video monitor area as possible, given the new aspect ratio.

Setting a Video Monitor’s Aspect Ratio

To set a video monitor’s aspect ratio:

1. Click the video monitor whose aspect ratio you wish to configure:

Video monitor with an aspect ratio of 16:9

2. In the 

Properties

 pane, click the 

Current aspect ratio

 box, and then select the appropriate aspect 

ratio from the list:

Note: 

Double-click the video, if is part of a composite monitor.

Содержание Kaleido-X
























































































































































































































































































































































































































Отзывы:

Нет отзывов