manualshive.com logo in svg

Miranda Kaleido-X, Руководство пользователя, Страница: 184 / 407

Поделиться
Скачать
Miranda Kaleido-X Скачать руководство пользователя страница 184

176

Creating Layouts

9

5. Assign every monitor a logical source. See “Adding Monitors to a Layout” on page 178.

6. On the 

File

 menu, click 

Save

. Alternatively, click the Save button on the toolbar.

The 

Save Layout

 window appears:

7. Type a name for the layout.

8. Click 

Save

.

Creating Full Screen Layouts

To create a full screen layout:

1. Click the 

Layouts

 tab in the main window.

2. On the 

File

 menu, click 

New

.

The 

Create a New Layout

 window appears. It lists all the existing rooms and full screen zones in your 

system:

Note: 

In the case of a 

KMV-3901/3911

 multi-viewer, layouts are subject to the following limitations:

• up to eight video monitors over two displays (overlapping is not supported)
• up to four stereo audio level meters per video monitor
• one time code per video monitor
• only digital clocks are supported
• XDS metadata monitors are not supported

Содержание Kaleido-X
























































































































































































































































































































































































































Отзывы:

Нет отзывов