Miranda Kaleido-X, Руководство пользователя, Страница: 163 / 407

Configuring Displays
155
2. Select the resolution you wish to customize (or the one on which you wish to base a new resolution),
from the list at the bottom of the window.
3. Under either the Porch or the Modeline section—depending on whether you prefer to specify front
porch, back porch, sync, and active values, or blank start, sync start, sync end and blank end—, set the
refresh rate and other timing parameters so that they match those of the physical display you need to
configure:
Note: When you modify one of the default resolutions, you can only save your changes as a new
resolution. On the other hand, custom resolutions can be tweaked and saved repeatedly until the desired
configuration is achieved. However, make sure that the active width and active height values you specify
match those of one of the default resolutions, otherwise your custom resolution will be ignored.