manualshive.com logo in svg

Miranda Kaleido-X, Руководство пользователя, Страница: 307 / 407

Поделиться
Скачать
Miranda Kaleido-X Скачать руководство пользователя страница 307

Configuring Internal Router Cards

299

2. Click the 

Router Configurations

 tab, and then navigate to the 

Kaleido-X (7RU) (Internal Router)

 

folder under 

Physical Routers

, in the 

Routers

 list. 

The router protocol, connection type, host name and levels are predefined (and cannot be modified):

Notes

• The following ports are always active and can be used for controlling a Kaleido-X over TCP/IP, via 

the associated protocols:
— port 14000 (SW-P-08)
— port 2000 (SW-P-02)
— port 4381 (VikinX Modular)
— port 5194 (NVISION Ethernet protocol - Compact router)

• When controlling a multi-viewer, by using one of the TCP/IP router protocols, the router level to 

be controlled must be configured in XEdit (see step 5 under “Creating a Single Multi-Viewer 
System” on page 77). No other communication configuration is required in XEdit.

Содержание Kaleido-X
























































































































































































































































































































































































































Отзывы:

Нет отзывов