Miranda Kaleido-X Скачать руководство пользователя страница 119

Страница: 119 / 407

Multi-Viewer Input Calibrations

111

To select the AFD source for an SD signal:

1. In the main window, click the

System

tab, and then click

Description/Calibrations

on the

second-level tab bar.

A hierarchical list representing the current system appears.

2. In the list, expand the multi-viewer whose inputs you wish to calibrate.

3. Expand the appropriate input, and then click

AFD/WSS

4. Click the

Properties

tab.

5. Select

Legacy AFD 3 bits

to support the legacy AFD 3-bit format for the Video Index.

6. Select the appropriate value from the

SD AFD Source

list.

The default value is

Auto

which means that the multi-viewer will automatically detect what is present

in the signal and use it to report AFD. If more than one AFD type is present in the signal, and the

AFD Source

is set to

Auto

, then AFD type is selected in this order: (1) AFD-2016 first, (2) AFD-VI, or (3)

WSS.

7. Click

Apply to all

to apply the associated setting to all video inputs on your multi-viewer.

Calibrating Detail Enhancement and Dynamic Range

Note:

For AFD VI, the AFD can be encoded as 4 bits or 3 bits (legacy).

Note:

For an HD signal, the AFD is always AFD-2016, so no calibration is needed.

Note:

The KMV-3901/3911 multi-viewer does not support detail enhancer calibrations.

Содержание Kaleido-X
























































































































































































































































































































































































































Результаты поиска

Содержание Kaleido-X

Отзывы:

Miranda Kaleido-X, Руководство пользователя, Страница: 119 / 407

Результаты поиска

Содержание Kaleido-X

Отзывы: