Miranda Kaleido-X Скачать руководство пользователя страница 235

Страница: 235 / 407

Working with Composite Monitors

227

UMD within unlocked composite

7. Move the audio level meter

to the very edge

of the composite, using the mouse and then finishing with

the arrow keys, and resize it as appropriate:

Audio level meter resized and moved to the side

8. Move the UMD

to the very bottom

of the composite, using the mouse and then finishing with the arrow

keys, and resize it if needed:

UMD resized and moved to the bottom, with its upper right handle matching the audio level meter’s lower left handle

Содержание Kaleido-X
























































































































































































































































































































































































































Результаты поиска

Содержание Kaleido-X

Отзывы:

Miranda Kaleido-X, Руководство пользователя, Страница: 235 / 407

Результаты поиска

Содержание Kaleido-X

Отзывы: