manualshive.com logo in svg

Miranda Kaleido-X, Руководство пользователя, Страница: 193 / 407

Поделиться
Скачать
Miranda Kaleido-X Скачать руководство пользователя страница 193

Managing Layouts

185

3. In 

Pick a Color

, click the 

RGB

 tab, and then set the 

Red

 to 254, 

Green

 to 0 and 

Blue

 to 254:

Note: 

Since bright pink colors matching the RGB values listed below are considered pass-through colors, 

and since background keying is always enabled, if a layout's background color (or any monitor's color 
attribute) is set to any of these RGB values, the DVI input will be displayed in the corresponding areas on 
the monitor wall. If there is no signal at the associated DVI input (or the multi-viewer does not support 
DVI input, as would be the case with a KMV-3901/3911), residual data may be visible in such areas.

•

Pass-through colors:

 RGB (254,0,254), (254,0,255), (254,1,254), (254,1,255), (255,0,254), 

(255,0,255), (255,1,254), (255,1,255)

Do not use these colors for any monitor's color attributes. A layout's background should only be set to such 
a color if a DVI input will be contributing the actual background for this layout on the monitor wall.

Содержание Kaleido-X
























































































































































































































































































































































































































Отзывы:

Нет отзывов