Miranda Kaleido-X Скачать руководство пользователя страница 251

Страница: 251 / 407

Detailed Directions

243

9. Export the database to the Kaleido-X.

Creating a background action from the System list

1. Under the

System

tab (or any other tab that shows a filtered System list displaying alarms), right-click

on a specific alarm:

2. From the

Set action

menu, select a trigger condition:

— on Change
— on Disabled
— on Normal/OK
— on Critical/Error

The

Action Editor

window appears.

3. From the

Action list

pane, click and drag one of the available action items to the middle column:

Note:

The trigger conditions

on Minor/Warning

and

on Major

are supported for Gateway alarms only.

Содержание Kaleido-X
























































































































































































































































































































































































































Результаты поиска

Содержание Kaleido-X

Отзывы:

Miranda Kaleido-X, Руководство пользователя, Страница: 251 / 407

Результаты поиска

Содержание Kaleido-X

Отзывы: