Miranda Kaleido-X, Руководство пользователя, Страница: 146 / 407

138
Creating Logical Sources
7
Adding Physical Assignments
Once you have created a logical source, you must make the physical assignments. This is required before
you can create a layout.
1. In the sources table, click the cell that corresponds to the level you wish to define for this logical source.
2. Expand the filtered System list that appears in the Tools pane, and then drag the appropriate element
from the list, to the selected level in the sources table.
Sources table with a selected cell in the Video level category for Channel1
3. Repeat the procedure until all desired physical assignments are completed for this logical source.
Making Further Assignments by Incremental Copy
Once done with a first logical source, if the next logical source is to be similar to the first one, it is possible
to use incremental copy to automatically create it. Alternatively, if only one or a few specific levels are to
be similarly configured, it is possible to use incremental copy on the corresponding level column only.
To use the incremental copy tool to propagate physical assignments to adjacent logical sources:
1. Click the row header for the logical source whose assignments you wish to propagate.
A small square, the incremental copy zone , appears in the bottom right corner of the header cell.
2. Move the pointer to the incremental copy zone. The pointer changes to crosshairs:
Incremental copy zone