manualshive.com logo in svg

Miranda Kaleido-X, Руководство пользователя, Страница: 51 / 407

Поделиться
Скачать
Miranda Kaleido-X Скачать руководство пользователя страница 51

Toggling Safe Area Markers

43

Toggling Safe Area Markers

To toggle the safe area markers on a video using the RCP2:

•

Move the pointer over the video source, and then press SAFE AREA on the RCP2. Continue pressing SAFE 
AREA to toggle the markers.

To toggle the safe area markers on a video using the mouse:

1. Right-click the video source, and then click 

Safe Area

 on the shortcut menu:

The safe area markers appear inside the video window:

2. Click 

Safe Area

 again on the shortcut menu, to hide the markers.

Notes

• The overscan margins are set to 5% by default. They can be customized in XEdit.
• In the case of a KMV-3901/3911 multi-viewer, up to 10% cropping is supported.
• Safe title area and aspect ratio markers follow the video signal (e.g. if the safe title is within 5% 

of top, left, right and bottom, then when the video is in default overscan mode, the safe title will 
not appear).

Содержание Kaleido-X
























































































































































































































































































































































































































Отзывы:

Нет отзывов