Miranda Kaleido-X, Руководство пользователя, Страница: 293 / 407

Configuring an External Router
285
At this point, you have added a level to a physical router, which appears in the Levels list under the
Router Configurations tab.
For example, if the physical router is a controller talking to a cascade of routers using a specified
protocol, you might have defined one of these, a video router, as Level 0 in the cascade, with 16
sources and 16 destinations (16 × 16).
7. You can continue to add levels for other routers in the cascade. The screens below, for example, show
how to define a 32 × 32 level for a Nevion (Network Electronics) audio router:
It is fairly typical to have an audio and a video router connected to the same serial port. When a
crosspoint switch is sent out over the serial port, it addresses both routers, so that the audio follows
the video switch.
Step 3 – Adding Logical Routers
Logical routers add another layer of refinement over the control of a router. In a typical situation, a very
large router (e.g. 1024 × 1024) might be used to control a TV station. The station manager does not want