Miranda Kaleido-X, Руководство пользователя, Страница: 10 / 407

2
New Features
1
• Support for embedded audio at the HD-SDI monitoring output: All multi-viewer models now
support monitoring of one audio pair, embedded on Group 1, at the HD-SDI output.
• KMV-3901/3911: Support for dynamic range calibration. See “Calibrating Detail Enhancement and
Dynamic Range” on page 111.
• Custom images: The maximum size for a custom safe area image, clock logo, or layout background
image has increased to 256 KB. See “Selecting a Background Image for a Layout” on page 182,
“Inserting a Clock Logo” on page 223, and “Adding a Custom Safe Area Image” on page 189.
Features Introduced in Kaleido-X Version 5.20
• Support for 3D-stereoscopic sources : Kaleido-X, Kaleido-X16, and KMV-3901-8×2 now support
merging two distinct signals (a left eye signal and a right eye signal) and interleaving them into a
composite video. The interleaved composite, displayed on a 3D-capable display, viewed with polarized
3D glasses, is seen as a stereoscopic, 3D image. In addition, combining 2D images and 3D images
(interleaved) on one display is supported.
• Support for audio monitoring output through HDMI : The Kaleido-X16 and KMV-3901-8x2 now
support audio monitoring output over HDMI, for PCM audio pairs from SDI sources.
• Support for Cascade solution : To address solutions with more inputs per head using smaller cost-
effective multi-viewers, KMV-3901-8x2 multi-viewers can now be configured in cascade. This allows
the support of the following configurations:
– KMV-3901-8x2 cascade with 16 inputs × 2 outputs
– KMV-3901-8x2 cascade with 16 inputs × 1 output
– KMV-3901-8x2 cascade with 24 inputs × 2 outputs
– KMV-3901-8x2 cascade with 24 inputs × 1 output
Features Introduced in Kaleido-X Version 5.10
Kaleido-X version 5.10 was a major release containing several new features, enhancements and bug fixes.
Note: In the case of the Kaleido-X16, support for audio monitoring at the HD-SDI output requires
version 5.30 (or later) of the Kaleido-X Software, and recent hardware. In the XAdmin Status and Options
page, under SYSTEM, the value indicated for the
Card revision attribute must be 0x4 or more.
Note: To be able to monitor a 3D stereoscopic signal, you must first add a second video level to your
logical sources (so you have a level for each eye), and then for each video monitor or composite you wish
to use for 3D monitoring, you must assign the left-eye and right-eye levels.