Miranda Kaleido-X, Руководство пользователя, Страница: 366 / 407

358
Administration and Servicing
16
Detailed Directions
Assigning an IP Address to Each Device in Your System
Multi-viewers and most peripheral devices that are part of a Kaleido-X system communicate through a
TCP/IP network. Configuring your system’s network parameters includes the following:
• Assigning an IP address, and specifying the appropriate network mask, gateway address, and a system
name for each multi-viewer. Refer to “Default IP Settings” on page 346, and to “Configuring a Multi-
Viewer’s IP Settings” on page 358.
• Configuring the Kaleido-RCP2, if available. Refer to “Configuring the Kaleido-RCP2” on page 365.
• Configuring the Audio Bridge Terminal (ABT), if available. Refer to “Configuring an Audio Bridge
Terminal” on page 368.
Configuring a Multi-Viewer’s IP Settings
To change the Kaleido-X’s system IP address, and adjust your system’s configuration:
1. Configure your client PC with an IP address in the same range as the IP address of the multi-viewer (see
“Changing the Client PC’s IP Address” on page 363).
2. Open a Web browser window and type the multi-viewer’s IP address in the address bar.
1
The Kaleido-X home page appears:
See also: • For more information on the Kaleido-RCP2, refer to the Kaleido-RCP2 Guide to Installation and
Operation , available on the DVD that shipped with your system.
• For more information on the ABT, refer to the Audio Bridge Terminal Guide to Installation and
Operation , available on the DVD that shipped with your system.
1. The multi-viewer must have Kaleido-X software version 2.10 or later.