Miranda Kaleido-X, Руководство пользователя, Страница: 278 / 407

270
Routers & Kaleido-X
12
Controlling External Routers in a Cascade
1. An operator chooses an assignment option on the monitor wall menu (e.g. “switch output 23 of
external router A, Level 2 to QC monitor”).
2. The Kaleido-X Software interprets the command, and sends it to the designated router over a serial or
TCP/IP connection, using the appropriate router protocol.
3. The physical router receives the command, and then relays it to the other physical routers in the
cascade using an internal communications mechanism (e.g. MIDI).
4. When the targeted Level receives the command, it executes a crosspoint switch, either changing the
signal on one of its connections to a multi-viewer input, or…
5. …sending the signal to another device (e.g. vector scope, QC monitor, ISO recorder).
Note: In the same way, commands from the monitor wall menu can also change crosspoints on the
multi-viewer’s internal router (if available) or on the KX Router logical router.