Miranda Kaleido-X Скачать руководство пользователя страница 196

Страница: 196 / 407

188

Creating Layouts

Aspect ratio selection

The selected aspect ratio is applied to the video window, within the video monitor:

Video window’s aspect ratio changed to 4:3, within a 16:9 video monitor

To set a custom aspect ratio for a video monitor:

1. Click the video monitor for which a custom aspect ratio is needed.

2. In the

Properties

pane, click the

Custom aspect ratio

box.

The box becomes editable.

3. Type the appropriate aspect ratio, and then press Enter.

The new aspect ratio is applied to the video window, within the video monitor, and it is added to both
the

Current aspect ratio

, and

Custom aspect ratio

lists.

Note:

Double-click the video, if is part of a composite monitor.

Note:

The custom values are appended to the

Custom aspect ratio

list on an ongoing basis. They can

then be applied to other monitors in other layouts.

Current aspect ratio

only lists the current custom

ratio, if any, in addition to the default 16:9, and 4:3 values.

Содержание Kaleido-X
























































































































































































































































































































































































































Результаты поиска

Содержание Kaleido-X

Отзывы:

Miranda Kaleido-X, Руководство пользователя, Страница: 196 / 407

Результаты поиска

Содержание Kaleido-X

Отзывы: