Miranda Kaleido-X Скачать руководство пользователя страница 212

Страница: 212 / 407

204

Creating Layouts

4. Click the appropriate color square.

Swatches in the selected color appear under

Preview

5. Click

to close the

Choose Background Color

window.

Edit Audio Scale

, the corresponding button and the corresponding part of the audio monitor

preview show the selected color.

6. Repeat the procedure until all three colors are set as desired.

7. Enter the audio thresholds in

Upper limit

and

Lower limit

8. Type a name for the new audio scale in the box at the bottom, and then click the

Save as

button.

Removing Audio Scales From the System

To remove a custom audio scale from the system:

1. On the

Tools

menu, click

Edit audio scales

The

Edit Audio Scale

window appears.

Note:

When you modify one of the default audio scales, you can only save your changes as a new audio

scale. On the other hand, custom audio scales can be tweaked and saved repeatedly until the desired
configuration is achieved.

Содержание Kaleido-X
























































































































































































































































































































































































































Результаты поиска

Содержание Kaleido-X

Отзывы:

Miranda Kaleido-X, Руководство пользователя, Страница: 212 / 407

Результаты поиска

Содержание Kaleido-X

Отзывы: