Miranda Kaleido-X, Руководство пользователя, Страница: 121 / 407

Multi-Viewer Input Calibrations
113
5. In the Properties pane, type the page number you wish to be the default selection for Page A, in the
Teletext Page A Selection box. Alternatively, use the slider to set the page number:
6. Click Apply to all if you wish this setting to be the default Page A selection for every video signal on
your system.
7. Repeat the procedure for the Page B, C, and D elements.
Calibrating Metadata Holding Time
To calibrate metadata holding time:
1. In the main window, click the System tab, and then click Description/Calibrations on the
second-level tab bar.
A hierarchical list representing the current system appears.
2. In the list, expand the multi-viewer whose inputs you wish to calibrate.
3. Expand the appropriate Video element, select the metadata element whose holding time you wish to
configure, and then set the relevant values under Calibration in the Properties tab:
Note: On the monitor wall, only Page A will be available with the associated video signal. However,
alarms can be configured for all four preset pages. See “Configuring Alarm Debouncing” on page 128 for
instructions on how to configure an alarm.
CC holding time: Set the delay (between 5 and 360 seconds) after which closed
captions (608) are cleared: