Miranda Kaleido-X, Руководство пользователя, Страница: 312 / 407

304
Routers & Kaleido-X
12
1. An operator right-clicks a monitor and assigns a logical source by using the Assign Source window.
2. The Router Connections tab in XEdit allows you to map physical connections between a number of
INPUT connectors on the multi-viewer and the upstream router’s OUTPUTs that feed them, which
allows the Kaleido-X Software to determine the crosspoint switch needed.
3. The multi-viewer sends this command to the external router, over a serial or TCP/IP connection, using
the appropriate protocol.
Note: In the case of the Kaleido-X and Kaleido-X16 multi-viewer models, it is also possible to select a
source from the Assign [router] input menu. However, as of version 5.20 of the Kaleido-X Software,
Miranda strongly recommends configuring the KX Router logical router to cover all routing purposes
within the multi-viewer system.
Assign Source window on the monitor wall
DVI outputs to monitor wall
INPUTs 1 to 96 entering KXI cards
OUTPUTs 1 to N exiting router, some of which are
physically connected to KXI INPUTs
SOURCES (e.g. CAM_1, SAT_1)entering router