Miranda Kaleido-X, Руководство пользователя, Страница: 322 / 407

314
Tally Interface Devices
13
3. Using the straight DE-9S-to-RJ-45 adapter (part no. 1737-3000-102), connect the other end of the
cable to the enabled serial tally port on the switcher.
To set up the multi-viewer:
1. Launch XEdit.
2. In the main window, click the System tab, and then click Description/Calibrations on the second-
level tab bar. The main pane displays the System hierarchical list, and the Tools pane displays the
equipment library when the root of the System list is selected.
3. Drag the Kalypso device from the equipment library onto the root of the System hierarchical list.
Alternatively, right-click the list root, and then click Insert Kalypso on the shortcut menu.
A window appears, prompting you for a device identifier.
Device identifier input window
4. Type a name for the Kalypso module in the Enter device identifier box, and click OK .
5. Click the Interconnects tab.
6. Position the pointer over the multi-viewer icon, then click and drag towards the Kalypso device icon.
A line representing the connection between the multi-viewer and the device appears.
Note: Since the protocol is unidirectional, only the transmit pins are required from the switcher’s remote
port. See “RS-422 Connection Diagram” on page 28 for pinouts on the multi-viewer.
Required pins Signal
7 TX+
2 TX-
Note: On the multi-viewer, Kalypso is the module that receives and interprets serial tally information
from Ross Video production switchers.