Miranda Kaleido-X, Руководство пользователя, Страница: 306 / 407

298
Routers & Kaleido-X
12
Configuring Internal Router Cards
The KXO-24Router card provides 24 external monitoring outputs that can route any of the 96 HD/SD SDI
inputs of the Kaleido-X (7RU). Two cards can be installed in a Kaleido-X (7RU) to provide up to 48 outputs.
These unprocessed outputs can be used to feed high-quality CRT monitors, test equipment such as
waveform monitors, as well as master control or production switchers.
To configure internal router cards:
1. Make sure that one or both internal router slots in the System list have a router card installed. To add
an internal router card, right-click OPTION A or OPTION B in the System list, and then click Insert KXO-
24Router on the shortcut menu:
A KXO-24Router card appears in the selected slot:
Notes
• The logical router matrix ID must be manually entered on the Snell (Pro-Bel) controller—this
is usually done via a Web interface, but is sometimes done over a serial connection. Some
controllers allow you to program individual buttons, or groups of buttons.
• The Snell (Pro-Bel) controller can also use the logical router level IDs (e.g. [0] Video, [1] Audio)
when it sends commands, allowing you to target just video crosspoints, just audio crosspoints,
or both.
IMPORTANT: You must always configure a logical router for a physical external router. There is no
way to control a physical external router directly.