Miranda Kaleido-X, Руководство пользователя, Страница: 285 / 407

Q & A
277
Standard wiring between multi-viewer and Ross Synergy switcher wired to SMPTE “slave” specification
The Miranda 1792-3700-100 ( crossover ) adapter can be connected directly to the Philips controller:
Standard wiring between multi-viewer and devices wired to SMPTE “master” specification (e.g. Philips Jupiter router control
system, Miranda Presmaster PCS)
Alternatively, use the Miranda 1737-3000-102 (straight) adapter but with a crossover cable between the
multi-viewer and the adapter.
Q & A
Q: Is the internal router used to change inputs to the multi-viewer in order to direct signals
to the monitor wall?
A: No, an internal router card is not needed to display video on the monitor wall. The outputs of the
internal router do not feed into the multi-viewer’s inputs—they come from the multi-viewer’s inputs
via the midplane.
Example #2: Philips VM-3000 (RS-422)
1 Ground 4 Not connected 7 RX+
2 RX– 5 Not connected 8 TX–
3 TX+ 6 Not connected 9 Not connected
Pinout of each RS-422 port’s
RJ-45 connector on the
multi-viewer
Pinout of straight adapter
(Miranda part no. 1737-3000-102)
RJ-45 DE-9 male DE-9 female
Pinout of RS-422 connector
on SMPTE slave device
Pinout of each RS-422 port’s
RJ-45 connector on the
multi-viewer
RJ-45 DE-9 male DE-9 female
Pinout of crossover adapter
(Miranda part no. 1792-3700-100)
Pinout of RS-422 connector
on SMPTE master device