Krone 870 HDP Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 568

Krone 870 HDP Скачать руководство пользователя страница 94

Commissioning

94

Pos: 77.46 /BA/Ei nstellungen/Groß packenpresse/Ballenschurre ei nstellen @ 24\mod_1241442284883_78.docx @ 244974 @ 2 @ 1

8.7

Setting the bale chute

Fig. 54
When it is unfolded, the bale chute represents an extension of the bale channel chamber. For

big bales to be set down on the ground correctly, the back edge of the bale chute must not be

too high above the ground. Otherwise the bales will be damaged when they are placed on the

ground.
• The inclination of the bale chute to the ground can be sued to adjust the length of the

retaining chain (2) of the bale chute

• To do this, adjust the nut (1) on either side of the baling channel

Pos: 77.47 /BA/Ei nstellungen/Groß packenpresse/Ballenschurre ei nstellen bei Ausführung Ballenwaage @ 309\mod_1417596361061_78.docx @ 2397461 @ 3 @ 1

8.7.1

With Bale Scale Design

The setting of the inclination of the normal chute to the bale scale is different. In case of the

normal chute, the bale should leave the chute quickly. In case of bale scale (optional), the bale

should remain on the chute for weighing for a short time.
• Reduce the inclination of the bale chute to the ground by means of the length of the bale

chute supporting chain (2).

• To do this, adjust the nut (1) on both sides of the bale channel.

Pos: 77.48 /BA/Ei nstellungen/Groß packenpresse/Hi nweis Ballenwaag e kalibrier en @ 92\mod_1326782125428_78.docx @ 781789 @ @ 1

Note

If the inclination of the bale chute is changed, the bale scale must be recalibrated if the machine

has one (see chapter on KRONE ISOBUS terminal CCI "Calibrating the Bale Scale").

Pos: 77.49 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
92
93
94
95
96
...
»

Содержание 870 HDP

























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов