Krone 870 HDP Скачать руководство пользователя страница 53

Страница: 53 / 568

Machine Description

Pos: 55.11 /Ü berschriften/Ü berschriften 2/K-O/KKennzeichnung @ 0\mod_1195564622099_78.docx @ 496 @ 2 @ 1

5.2

Identification Plate

Pos: 55.12 /BA/Ei nlei tung/Kennzeichnung/BiG Pack/Kennzeichnung BiG PAck @ 17\mod_1236164057449_78.docx @ 201362 @ @ 1

BPXC0100

Maschinenfabrik Bernard Krone GmbH

Heinrich-Krone-Str. 10 D-48480 Spelle

Made in

Germany

Fig. 17
The machine data are located on the type plate (1). This is located on right-hand side of the

machine.

Pos: 55.13 /BA/Ei nlei tung/Kennzeichnung/Angaben für Anfrag e und Bestell ung en_F ahrzeugi dent-Nr. @ 0\mod_1195565119708_78.docx @ 515 @ 2 @ 1

5.3

Information Required for Questions and Orders

Type

Year of manufacture

Vehicle ID number

Note

The entire identification plate represents a legal document and should not be altered or

rendered illegible!

When asking questions concerning the machine or ordering spare parts, be sure to provide type

designation, vehicle ID number and the year of manufacture : To ensure that these data are

always available, we recommend that you enter them in the fields above.

Note

Authentic KRONE spare parts and accessories authorised by the manufacturer help to ensure

safety. The use of spare parts, accessories and other devices which are not manufactured,

tested or approved by KRONE will result in the revoking of the liability for damages resulting

thereof.

Pos: 55.14 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Содержание 870 HDP

























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 870 HDP

Отзывы:

Krone 870 HDP, Оригинальная инструкция по эксплуатации, Страница: 53 / 568

Результаты поиска

Содержание 870 HDP

Отзывы: