Krone 870 HDP Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 568

Krone 870 HDP Скачать руководство пользователя страница 68

Machine Description

68

Pos: 55.89 /BA/Bedienung /Groß packenpresse/Garnl aufanzeige Oberfaden (Doppel knoter) @ 20 \mod_1238741788902_78.docx @ 224916 @ 3 @ 1

5.14.2

Twine motion indicator upper twine (double knotter)

Fig. 36
The upper twine motion is monitored by reflectors (twine motion indicator) positioned above the

machine. While the bale is being formed, the twine motion indicator should move back and forth

in a pulsing cycle. All indicators generally rise and lower at the same time except in the event of

a malfunction. A malfunction of this nature is indicated by the fact that the twine motion indicator

that is featuring a malfunction will not be in the same position as the other indicators.

The following malfunctions can be indicated:

The twine motion indicators are staying up:
•  Twine has wound around the knotter hook
•  The needle has not caught the upper strand of twine (twine will not be cut through)
•  The knot has been left hanging on the knotter hook (after the tying is complete, one twine

motion indicator remains down longer than the other)

The twine motion indicators are staying down:

•  Twine tension is too low
•  The upper twine strand is torn
•  The knotter hook has not tied a knot

Pos: 55.90 /Ü berschriften/Ü berschriften 3/A-E/E/Elektrische Knoter kontrolle @ 168\mod_1367993462294_78.docx @ 1452492 @ 3 @ 1

5.14.3

Electrical Knotter Monitoring

Pos: 55.91 /BA/Bedienung /Groß packenpresse/Knoter kontroll e 870 HD P / XC @ 312\mod_1421053255141_78.docx @ 2413255 @ @ 1

BPHS0015

Fig. 37
The machine is equipped with an electrical knotter monitoring. In this process, each knotter is

monitored individually by a sensor (1). If an error occurs on the knotter, a corresponding error

message appears in the display of the operation terminal.

The knotters are numbered from 1 to 5 in direction of travel from left to right.

Pos: 55.92 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
66
67
68
69
70
...
»

Содержание 870 HDP

























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов