Krone 870 HDP, Оригинальная инструкция по эксплуатации, Страница: 436 / 568

7 Terminal – machine functions [Medium Plus/Comfort Plus Electronics]
7.3 Displays on the working screen
30
Supplement to Operating Instructions 150000774_00 _en
BiG Pack 870 HDP, BiG Pack 870 HDP XC
Icon Designation Explanation
94 / 240 cm Bale length display • The black value and the bar indicate
the current bale length.
• The blue value and the red mark
indicate the set target bale length.
• The blue value is touch-sensitive.
Icon Designation Explanation
Bale channel flap pressure
in bar or PSI (depending on
selected system of units) In manual mode
• The black value under the bar display
and the bar indicate the current bale
channel flap pressure.
• The blue value under the bar display
and the red mark indicate the set target
bale channel flap pressure.
• The blue value is touch-sensitive.
Force of pressure as % In automatic mode
• Display for the baling force on the right
and left in the bale channel.
• The black value under the bar display
and the bar indicate the current baling
force.
• The blue value under the bar display
and the red mark indicate the set target
baling force.
• The display may fluctuate considerably.
The control only functions when the
packer is supplying crops to the piston.
• The bale channel flap pressure is
automatically set by the system based
on the measured plunger force.
• The blue value is touch-sensitive.
Icon Designation Explanation
Flywheel brake applied
Blade cassette not up
Knot run Is displayed briefly after a knot is tied.
When the knotter signal is activated, a horn
sounds for approx. 1 s,
refer to page 48 .
Bale ejector active
Self-steering axle locked
Warning beacon switched
on
Warning beacon switched
off