Krone 870 HDP, Оригинальная инструкция по эксплуатации, Страница: 143 / 568

Terminal – Machine Functions [Medium/Comfort Version Electronics]
143
Pos: 85.47 /BA/Info-Center/CCI-ISOBU S-Ter minal/CCI- BiG Pack/Grundbild Handbetrieb/Anzeig en i m Hauptfenster/Anzeigen im Hauptfenster (III) linke Spalte H S Baurei he T1 @ 351\mod_1436879942388_78.docx @ 2630859 @ @ 1
Selectable display elements
Depending on the machine configuration, the following display elements can be positioned in
the main window:
Symbol Designation Explanation
Current baling force as % In manual mode.
Maximum 100 %
Current bale channel flap
pressure
In automatic mode.
In bar or PSI (depending on selected
system of units).
Current total number of
bales
The number indicates the selected
customer counter.
Current PTO speed
In min
-1
Current layer thickness
In cm or inch (depending on selected
system of units).
Current number of layers
of the last compressed
bale
Current degree of
moisture of the crops
Bale weight
Weight of the bale last weighed.
Ø
Current average weight of
the weighed bales
Current total weight of all
bales
Pos: 85.48 /BA/Info-Center/CCI-ISOBU S-Ter minal/CCI- BiG Pack/Grundbild Handbetrieb/Anzeig en i m Hauptfenster/Anzeigen im Hauptfenster (III) linke Spalte H S Baurei he T2 @ 351\mod_1436882893725_78.docx @ 2631110 @ @ 1
Symbol Designation Explanation
Total length of all
compressed bales
In m or ft (depending on selected system
of units)
Current number of uncut
bales
Current number of cut
bales
For machines equipped with a cutting unit.
Knot run
Is displayed briefly after a knot is tied.
If activated, a horn sounds for approx. 1
second, see chapter Terminal – Menus
"Menu 1-2, Knotter signal".
Operating hours counter Counts only when PTO shaft is running.
Pos: 85.49 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1