Krone 870 HDP Скачать руководство пользователя страница 165

Страница: 165 / 568

Terminal – Menus [Medium/Comfort Version Electronics]

165

Pos: 85.92 /Ü berschriften/Ü berschriften 2/K-O/M /Modus änder n @ 377\mod_1443010974904_78.docx @ 2734998 @ 2 @ 1

16.5

Changing mode

Pos: 85.93 /BA/Info-Center/CCI-ISOBU S-Ter minal/M enüs bedi enen/M odus ändern_T ext @ 354\mod_1438090569459_78.docx @ 2643517 @ @ 1

It is possible to select between different modes in individual menus.

The

symbol in the upper line indicates that the displayed mode is saved.

• To open the next mode, press

• To open the previous mode, press

The

symbol in the upper line disappears.

• To save the mode, press

The set mode is saved and the

symbol is displayed in the upper line.

• To leave the menu, press

Pos: 85.94 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Содержание 870 HDP

























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 870 HDP

Отзывы:

Krone 870 HDP, Оригинальная инструкция по эксплуатации, Страница: 165 / 568

Результаты поиска

Содержание 870 HDP

Отзывы: