Krone 870 HDP Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 568

Krone 870 HDP Скачать руководство пользователя страница 43

Safety

43

Pos: 29.15 /BA/Sicherheit/4. Sicher hei tsaufkl eber/EU - ISO /942/942 459 0 (3x) Bestell-Nr. @ 274\mod_1404299329209_78.docx @ 2063805 @ @ 1

15) Order no. 942 459 0 (3x)

Pos: 29.16 /BA/Sicherheit/ 4. Sicher hei tsaufkl eber/EU - ISO /942/942 459 0 Bild/T ext @ 189\mod_1381214888144_78.docx @ 1622041 @ @ 1

L

Danger due to crushing or shearing

Risk of injury due to crushing or shearing points on moving

machine parts.
• While parts are moving, never reach into areas where there is

a risk of being crushed.

Pos: 29.17 /BA/Sicherheit/4. Sicher hei tsaufkl eber/EU - ISO /939/939 469 1 (2x) Bestell-Nr. @ 271\mod_1402898367602_78.docx @ 2044173 @ @ 1

16) Order no. 939 469 1 (2x)

Pos: 29.18 /BA/Sicherheit/4. Sicher hei tsaufkl eber/EU - ISO /939/939 469 1 Bild/T ext @ 200\mod_1385456794853_78.docx @ 1683380 @ @ 1

Danger due to impacts or crushing

Danger to life from machine parts folding down or lowering.
• Ensure that there is nobody in the swivel range of the machine

parts.

• Maintain distance from moving machine parts.

Pos: 29.19 /BA/Sicherheit/4. Sicher hei tsaufkl eber/EU - ISO /942/942 002 4 (1x) Bestell-Nr. @ 189\mod_1381220137082_78.docx @ 1622338 @ @ 1

17) Order no. 942 002 4 (1x)

Pos: 29.20 /Ü berschriften/Z wischenüberschriften/A-EBei Ausführ ung mit Knotergebl äse @ 274\mod_1404301313798_78.docx @ 2064038 @ @ 1

For design with knotter blower

Pos: 29.21 /BA/Sicherheit/4. Sicher hei tsaufkl eber/EU - ISO /942/942 002 4 Bild/T ext @ 189\mod_1381212442497_78.docx @ 1621655 @ @ 1

Danger due to rotating machine parts.

When the machine is running, there is a risk of injury due to

rotating machine parts.
• Before starting up, move the guards into their protective

position.

Pos: 45 /BA/Sicher heit/6. Ü ber arbeitete War nhi nweise/Hi nweis - N achbestellung/ Anbringung Aufkleber @ 357\mod_1438760742670_78.docx @ 2656419 @ 33 @ 1

3.6.1

Re-Ordering Safety Labels and Information Labels

Note

Each safety and information label is provided with an order number and can be ordered directly

from the manufacturer or from authorised dealer (refer to chapter “Contact Person”).

3.6.2

Attaching Safety Labels and Information Labels

Note - Attaching a label

Effect: Adhesion of label
• The attachment area must be clean, dry and free from dirt, oil and grease.

Pos: 46 /Ü berschriften/Überschriften 3/A-E/A/Ansprechpartner @ 0\mod_1195569394286_78.docx @ 839 @ 2 @ 1

3.6.3

Contact

Pos: 47 /BA/Adressen/Adresse Maschi nenfabrik KR ONE Spelle @ 444\mod_1460097223706_78.docx @ 3031795 @ @ 1

Maschinenfabrik Bernard Krone GmbH & Co. KG

Heinrich-Krone-Strasse 10

D-48480 Spelle (Germany)

Telephone: + 49 (0) 59 77/935-0 (Head Office)

Fax.: + 49 (0) 59 77/935-339 (Head Office)

Fax.: + 49 (0) 59 77/935-239 (Spare parts - domestic)

Fax.: + 49 (0) 59 77/935-359 (Spare parts - export)

Email:

[email protected]

Pos: 50 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
41
42
43
44
45
...
»

Содержание 870 HDP

























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов