Krone 870 HDP Скачать руководство пользователя страница 413

Страница: 413 / 568

Information on This Document

How to use this document

1.5

Supplement to Operating Instructions 150000774_00 _en

BiG Pack 870 HDP, BiG Pack 870 HDP XC

Icon

Explanation

Direction of motion

Direction of travel

open

closed

Magnification of display detail

Framings, dimension line, dimension line limitation, reference line for
visible parts or visible mounting material

Framings, dimension line, dimension line limitation, reference line for
covered parts or covered mounting material

Screen area to which is specifically pointed

Left-hand side of the machine

Right-hand side of the machine

Warning signs

Warnings of dangers are separated from the remaining text as warning signs and are identified
with a danger sign and signal words.

The warning signs must be read and the measures must be observed in order to prevent
personal injury.

Explanation of danger sign

This is the danger sign that warns of a risk of injury.

Please observe all notes marked with the danger sign in order to avoid injuries or death.

Explanation of signal words

DANGER

The signal word DANGER warns of a hazardous situation which will result in serious injuries
or death if the warning sign is ignored.

WARNING

The signal word WARNING warns of a hazardous situation which will result in serious injuries
or death if the warning sign is ignored.

Содержание 870 HDP

























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 870 HDP

Отзывы:

Krone 870 HDP, Оригинальная инструкция по эксплуатации, Страница: 413 / 568

Результаты поиска

Содержание 870 HDP

Отзывы: