Krone 870 HDP, Оригинальная инструкция по эксплуатации, Страница: 365 / 568

Malfunctions - Causes and Remedies
365
Pos: 160.43 /BA/Störungen - Ursachen und Behebung/Gr oß packenpr essen/Stör ung en-Ursachen-Behebung Doppel knoter T7 @ 25\mod_1242040506416_78.docx @ 249617 @ @ 1
No
.
Malfunction Cause and/or remedy
8 Second knot: (Starting knot) Twine winds
around the knotter hook.
8.1 Cause:
The upper tensioning arms are not working
properly.
• Tension path is blocked
• Tension is not sufficient
Remedy:
Check the upper tensioning arms for easy running.
• Clear the tension path (cf. malfunction no. 6; picture
BPXC0263)
• Increase the tension (cf. malfunction No. 2; picture
BPXC0256)
8.2
Cause:
Lower twine tension spring broken or released.
Remedy:
Replace the spring or mount it securely again (cf.
malfunction no. 2.1; picture BPXC0254).
8.3
Cause:
Insufficient twine tension on the lower twine
strand.
Remedy:
Increase the tension (cf. malfunction no. 2.1; picture
BPXC0254).
8.4 Cause:
Twine driver disc starts working too late.
Remedy:
Put the twine driver disc forward by turning clockwise
(refer to chapter Settings double knotter “Twine
retainer”).
8.5
Cause:
Needle overrun in the upper dead point is too big.
Remedy:
Check the needle settings (refer to chapter Settings
"Setting the upper dead centre of the needles (double
knotter)").
Pos: 160.44 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1