Krone 870 HDP, Оригинальная инструкция по эксплуатации, Страница: 424 / 568

4 Basic safety instructions
4.17 Sources of danger on the machine
18
Supplement to Operating Instructions 150000774_00 _en
BiG Pack 870 HDP, BiG Pack 870 HDP XC
If people have to leave the cabin despite the voltage flashover, for example because there is an
imminent threat to life due to fire:
„
Avoid simultaneous contact with machine and ground.
„
Jump away from the machine. Jump into a safe standing position. Do not touch the machine
from the outside.
„ Move away from the machine with very small steps. In doing so, make sure that your feet
are close to one another.
4.17 Sources of danger on the machine
Liquids under pressure
The following liquids are under high pressure:
• Hydraulic oil
Liquids escaping under high pressure may penetrate through the skin and cause severe
injuries.
„
Shut down and safeguard the machine and contact qualified specialist workshop upon
suspicion of damaged pressure system.
„ When searching for leaks, use suitable aids, e.g. a piece of cardboard to avoid injuries.
„
Never detect leaks with bare hands. Even a very small hole may lead to serious injuries.
„
Keep body and face away from leaks. Danger of infection!
„
Consult a doctor immediately if liquid has penetrated in the body. The liquid must be flushed
out of the body as soon as possible.
Hot liquids
If hot liquids are drained, people can scald or burn themselves.
„
When draining hot consumables, wear personal protective equipment.
„ Before performing any repair, maintenance or cleaning work, allow liquids and machine
parts to cool off, if necessary.
Damaged compressor unit
Damaged compressed air hoses of compressor unit may tear off. Hoses that move
uncontrollably may hurt persons seriously.
„
If it is suspected that the compressor unit is damaged, contact specialist workshop
immediately.
„
Shut down and safeguard the machine, refer to page 21 .
Hot surfaces
The following components may become hot during operation:
• Capacitor (optional)
„
Maintain a sufficient distance from hot surfaces.
„
Allow machine parts to cool down and wear protective gloves.